Your Cart is Empty


Cloud Revolution

Wire Buddha Wire Spools • 30ft (USA/Europe)


Wire Buddha Wire Spools • 30ft

From Andrew at Cloud Revolution!

Life is too short to use cheap China wire!

Wire Buddha Kanthal A1 is European wire rod that has been milled in Europe or USA. 100% No China Wire.

Kanthal A1 is a ferritic Iron-Chromium-Aluminium Alloy and has a very high resistivity and oxidization resistance. Kanthal A1 is composed of 20.5% Chromium, 5.8% Aluminum and Iron balance. For use in Rebuildable atomizers this wire has a higher operating temperature (1400°C) than Nichrome 80 and can last longer than it because of its ability to resist oxidation. Kanthal A1 has a thicker oxide layer when comparing it to Nichrome 80 and has a lesser chance to get hot spots compared to Nichrome 80. Wire Buddha Kanthal comes on a nice large easy to use spool, perfect for any builder who is serious about making better coils.

This wire may or may not be intended for standard single wire coil builds, this wire may be intended for advanced coil art and may not perform as well as a standalone wire. Please make sure you are buying the most suitable wire for your build before purchasing.

Rebuilding is for experienced users only and a knowledge of ohms law should be taken into account when building coils for Rebuildable Atomizer’s. Always exercise caution building your atomizer, always check your build’s resistance on an ohm reader before firing it on any device. Coils that are touching any part of the deck, air flow controller or any part of the coil touching any of the atomizer’s posts can result in a short and can cause serious damage to your devices if not checked on an ohm reader before use. Make sure to use high drain and high amperage batteries when using advanced user devices.