SMOK Spirals Plus Flavour Tank • 24.5mm 4ml
SMOK Spirals Plus is a bigger version of the Spirals tank being 24.5mm diameter with 4ml e-juice capacity. The brand new built-in coil heads use Japan imported cotton with a precise wicking hole. Joined by adjustable small sized air slots and an elongated drip tip, the tank has everything it needs to make the taste experience a whirlwind of flavors that offers even more clouds, available in 5 colors.
Size: 24.5 x 48mm
It comes with
- 1 x Spirals Plus Tank
- 1 x 0.6ohm dual core (pre-installed)
- 1 x 0.3ohm dual core
- 1 x RBA coil (single coil deck)
- 1 x Replacement glass tube
- 1 x User Manual
- Spare parts
How to fill e-Juice:
1. Hold the tank with one hand, and use another one to press top cap and move it clockwise.
2. Add e-liquid through the slot, and pay attention not to drip in the central airflow;
3. Close the cap carefully and firmly. Then let it stands for several minutes to get the organic cotton completely saturated.
How to build the RBA:
1. Before starting make sure your hands are clean.
2. Taking RBA deck apart.
3. Installing and positioning the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.
4. Cutting the ends of wire off.
5. Cutting a strip of cotton and make sure it’s not too much and not too less.
6. Inserting the cotton, and placing it in the middle.
7. Cutting the cotton at an angle and make sure it’s not too short and not too long.
8. Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.
24.5mm diameter and 4ml capacity
New large coil head
Adjustable small size air slots
Elongated delrin drip tip
Top filling system