Sense V-Jet 230W TC Starter Kit w/ 4.5ml V-Jet Tank
Here comes the Sense V-Jet 230W TC Kit! Powered by dual external 18650 batteries, the V-Jet fires up to a maximum output of 230W. The compact and ergonomic design makes it comfortable in hands! It supports various output modes - VW/VT/TCR/TFR - to meet your different vaping needs. The angular adjustment button provides an easy way for operation too. The V-Jet tank adopts flip-hinged top refill system and adjustable bottom airflow. Just get this kit for an amazing vaping experience!
Size: 46mm(L) x 87mm(H) x 29mm(W)
Battery: (requires 2 x 18650 batteries NOT INCLUDED available here)
Output Mode: VW/VT(SS,Ti,Ni)/TCR(M1, M2, M3)/TFR/BYPASS
Resistance range: 0.1ohm-3ohm(VW Mode), 0.1ohm-1ohm(VT/TCR/TFR Mode)
Output Power: 7W-230W
Color: Black/Red Black/Yellow Black/Green Black/Blue Black
Thread: 510 thread
Size: 24.8mm(D) x 58.5mm(H)
Resistance: 0.6ohm(Pre-installed, 40-100W)/0.4ohm(Extra coil, 40-100W)
Material: Stainless Steel, Pyrex Glass
Dual 18650 batteries (not included, available here) with 230W output
We recommend using an external charger (available here).
Lateral fire button for easy click
Full colored TFT LCD screen
Real Time Clock (RTC) display
Flip-hinged top refill system
Adjustable bottom airflow
Power on/off: Press the fire button 5 times in quick succession to turn the device on and off.
Mode Switch: Press the MFB(Multifunction Button) 2-3 seconds, you will enter Menu interface to choose for Mode Setting. There are VW/VT(SS,Ti,Ni)/TCR(M1, M2, M3)/TFR/BYPASS for you to choose.
Temperature Adjustment: When the temperature was set to 100℃, keep on pressing the down button, temperature will turn to 600F. When the temperature was set to 200°F, keep on pressing the down button, temperature will turn to 315℃. Quickly press the fire button 4 times can get into wattage adjust interface. Then you will see the letter "W" is flashing. The adjustable wattage is 7W to 230W.
Function Menu: Press MFB(Multifunction Button) 2-3 seconds, you will enter the function menu interface. Press up button or down button to choose the function. Press the MFB to make confirmation and go to next step.
Customization Setting:Press MFB(Multifunction Button) 2-3 seconds, you will enter the function menu interface. Press up and down button to choose the Customization Setting and press fire button to go into Customization Setting interface. Under Customization Setting, press fire up and down button to switch.
It comes with