Kraken RDA 1:1 Clone
Kraken Clone is a rebuildable that offers a 22mm diameter allowing to fit flushed with certain mods and/or devices with a large top base. The top cap which allows an adjustable airflow, and a pyrex tank that is approximately 2.5ml liquid capacity. The center posts allow either a single or dual coil configuration as well as being U-wick capable.
- 22mm outside diameter
- 15mm inside diameter
- 2.8mm wick holes
- 2.5ml capacity
- 1 Kraken Genesis
- 1 driptip
- 1 Stainless Steel mesh
- 1 kanthal wire
- 1 silica wick
- mini screwdriver
IMPORTANT NOTE: The Kraken Rebuildable Dripping Atomizers ( RDAs or RBAs ) are for EXPERTS and ARE NOT recommended for average users or beginners. The use and knowledge of how to properly test for shorts with a multimeter is a very important factor when building your own coils and wicks. WE DO NOT OFFER ANY WARRANTY, REFUNDS OR EXCHANGES ON ANY REBUILDABLE ATOMIZERS DUE TO THE NATURE OF THESE PRODUCTS.
OTHER IMPORTANT NOTES
- Wicks / Coils must be tested carefully with a multimeter before use.
- If Wick / Coil is not properly tested it will be a risk to the user to do so.
- Faulty Wicks / Coils WILL kill electronic devices.
- New Wick / Coil units must be tested and then used on a strong basic electrical APV / MOD that has short protection.
- No new Wick / Coil assembly should be used on an electronic device until it is known to be safe.
- These items destroy electronic devices if not properly built. This is a known issue.