iJust NexGen Starter Kit • 2ml 3000 mAh

$45.00

The iJust NexGen is a new all-in-one style by Eleaf, skillfully packing a built-in 3000mAh battery with a 2ml tank in a tube-like unit. With a single button to operate it, the iJust NexGen comes across as an ordinary easy-to-use kit, but there is so much more to it than that. Not only does it come with the HW coils that are designed for ultimate flavor, it is also features the retractable top filling system. Also with intuitive four color LEDs, you can easily check the battery status with a simple glance at the color of the light. 6 colors. 

 

Parameters

Diameter: 25mm
Height: 118mm
E-liquid capacity: 2ml
Battery capacity: 3000mAh
Output wattage: max 50W
Resistance range: 0.15ohm - 3ohm
 

It comes with

  • 1x iJust NexGen
  • 2x HW1 0.2ohm Head
  • 1x User manual
  • 1x USB cable
  • Spare Parts

Convenient Retractable Top Filling System
HW Coils for Big Clouds and Optimal Flavor
Intuitive 4 Color LEDs Revealing Battery Level
All-in-one Design with Internal 3000mAh Battery

Assembling:

1. First drip a few drops of e-liquid directly into the coil to make it fully saturated before first use;
2. Then screw the primed coil onto the atomizer base tightly;
3. Put glass tube, top cap and mouthpiece on;
4. Slide the mouthpiece back to reveal the fill port, slowly fill e-juice into the tank through the port, and then close the retractable top after filling; 
5. The airflow can be adjusted by turning the airflow control ring on the atomizer base;
6. Finally the iJust NexGen is ready for use. 

Power on/off:Press the button 5 times in quick succession within 2 seconds, and the indicator light flashes 5 times to show the device is powered on. In the same way, it can also be turned off. 

Vaping: Keep holding the button to take a puff when the device is powered on. 

Protections: 15s cutoff, short circuit protection, low voltage protection, resistance detect

Related products