Fogger V6 RTA RDA in Stainless or Black (Authentic by Yiloong)
Yiloong Fogger V6.0 rebuildable atomizer
Available in Stainless or Black
THe version 6 is a completely new configuration inside compared with other Fogger version tanks. First. it's dual coil setting to ensure to provide the best vaping experience. It has 4 slots to place the cotton wick. Second, easy to refill juice due to the bottom feeding and no need to disassemble the tank.
Straight glass tube to provide a large volume of juice, it can reach out to around 4ml at the maximum.
Four post & juice channel for coil build, with 16mm large chimney(bigger than V5.0)
Dual coil setting configuration
Top filling port, 2 holes, bigger hole is the filling hole (No screw needed, additional air intake hole in the opposite direction to prevent flooding created by pressure, which normally will happen for other top filling atomizers)
4ml volume capacity
Threading top cap ,easy to assemble and disassemble
Air flow control ring (ball bearing)
Push post for easy coil build (4 post screws came with the package, optional to switch from push button post to screw post.)
Real etched logo on top cap and laser printed on the chimney
Adjustable bottom pin
1 x Fogger V6 rebuildable atomizer (with Glass Drip Tip)
3 x Resistance wire for coil
2 x Fiberglass wick
3 x Extra screw
1 x Extra screw driver
2 x Extra black O-Ring
Always use caution when rebuilding wick & coil! All rebuildable atomizers should be tested carefully with a multimeter before use. Failure to test properly can result in physical injury. Please use at your own risk.