Dani 32.5

This is a big heavy piece of German craftmanship!

If you need a wider diameter DiCodes to fit a larger tank or RTA, the Dani 32.5 certainly fits that bill. The diameter of this beast is 32.5mm so those massive tanks you may already have in that size range will fit and look perfectly in proportion with this tube mod. This version features a spring loaded 510 connection so your atomiser will sit flush on the top cap, up to 80W power, accepts a single 20700 or 21700 battery (not included, available here), updated firmware including a wire type for SS316L and a wider range of wire co-eficients ranging from 50-650.

We recommend using an external battery charger (available here).

The Dani 32.5 offers 5 different modes, allowing the user to switch between variable watt, variable watt with heat protection, variable watt with power boost, variable temperature (various wire types supported), and a bypass mode which turns the device into an unregulated protected mod.

As you'd expect from a single button device packed with so many features and adjustments, the menu system is quite complex and can take some getting used to, but after a short amount of time, navigation and setting adjustments will become second nature. We urge you to take some time to read and understand the manual (link to the full manual can be found in the documentation at the bottom of this description.)

The Dani 32.5 is precision machined in Germany and backed by a two year warranty on the electronics.

• 80 Watt
• 32.5mm diameter
• 312g, 115mm
• 0.05 – 5 ohm total range
• OLED display
• 20700/21700
• spring-loaded center pin, CuBe
• ultra-low resistance CuBe-Spring for contacting the battery
• Temperature controlled vaping mode with various wire-types
• Optimized for dicodes resistance wire RESISTHERM
• Reverse battery protection
• Versatile menu structure
• Individual user preferences selection
• 2 years warranty
• Made in Germany
• dicodes Part-No: Dani 32.5
  
  
• reduction-cone to 30mm separately available