SQuape E[c] 22mm RTA • 100% Swiss Made
SQuape E[c] 22mm RTA
The SQuape E[c] is a cut-down and more affordable version of the SQuape E[motion]. It is a rebuildable tank atomiser which was developed and produced in its entirety in Switzerland. The SQuape E[c] is made by StattQualm to be used for the vaporisation of e-liquid. While the bases of the E[c] and E[motion] are identical, the entire stainless steel tank section was replaced with a simple PMMA tank. With this change, the TopFill system is no longer needed and it is very reminiscent of the popular SQuape R[eloaded] and R[s].
Short circuits are virtually impossible, through clever design of current conduction, as well as due to the nonconductive surface of the whole atomiser-chamber (consisting of ematalised and anodised aluminum).
The SQuape E[c] is a further development of the SQuape R[eloaded] and R[s]. The atomiser is ideal for both beginner builders and experienced vapers. Three different decks are available for the SQuape E[c]: Deck We, Deck Be and Deck De and are fully compatible with the SQuape E[motion]. In contrast to the SQuape R, the SQuape E[c] has improved poles for mounting the wire as well as a considerably softer airflow. It is ideal for both OpenDraw and, with the addition of the MTL kit, for mouth-to-lung vapers.
The Deck We is characterized by its very simple handling. The deck is ideally suited for cotton, fiber and mesh. Insert a pin up to 3mm diameter into the channel and attach the wire ends to the poles. Then pull the cotton through the coil and shorten the cotton to the length of the channel. The cotton should be adjusted and fill the channel well - done. There is not a more simple method for re-wicking an atomiser.
Recommendation for this deck: 0.5 - 2 Ohm / 10 - 25W
The power-single-coil deck! The Deck Be is characterized by its wide cotton pockets. The deck is ideally suited for cotton. Set a pin up to 3.5mm diameter onto the dentings and attach the wire ends to the poles. Then pull the cotton through the coil and shorten the cotton to the length of the base. Put the cotton down into the pockets - done. Very simple and easy to use.
Recommendation for this deck: 0.25 - 2 Ohm / 10 - 75W
The SQuape E[c] is the inexpensive and perfect complement to the SQuape E series. "The Most Affordable SQuape Ever"
- A very lean and elegant design
- Stepless airflow control
- Single- or dual coil usage with interchangeable decks.
- Adjustable 510 connector (gold plated)
- Deck is accessible even with full tank
Nonconductive components inside the evaporation-chamber (deck and chimney)
> no danger of short circuits
- Very easy handling and coiling options
- Suitable for Temp. Control and V/W mode
- Easy filling
- Diameter: 22 mm
- Height (without SQuip Tip and 510 connector): 46mm
- Weight: 38g
- Thread: 510
- Capacity: ~5ml
- Stainless steel components: stainless steel number 1.4404 / 316L
- Tank section: PMMA (thermally deburred)
- Deck and chimney: Aluminum ematalised, anodised
- Centerpin: Ecobrass gold plated
- Mouthpiece: Delrin black
O-rings: nbr 70 shore
Scope of delivery
1x SQuape E[c] incl. one Deck of your choice (interchangeable)
1x SQuip Tip E[c] black
1x air reducer screw (MTL1.6mm)
Spare screws and O-rings
Available in different colors as a full set: Black (standard), red, blue, green, purple and orange.
Note: It is necessary to install the enclosed deck before use (see drawing in the manual)
Note2: The tank is made of PMMA, which has been thermally deburred and is therefore very strong. Nevertheless, it should be noted that aggressive liquids - so-called tank killers - can attack the PMMA.