SMOK X Cube II 160W VV/VW Mod • TC Enabled • Bluetooth
Introducing the Smok X Cube II 160W Box Mod by Smoktech, is the latest and most advanced variable wattage device that comes with temperature control feature.
The great feature about the Smok X Cube 2 is the Bluetooth 4.0 technology (compatible with ISO 7.0+ and Android 4.3+ system). This feature allows you to track the location of the device and activate the temperature control function. The ranges for the temperature control settings are between 100℃ to 315℃ and 200˚F to 600˚F.
With its ability to fire up to 160W of power, it will enhance your vaping experience. The lowest wattage that can go is 6W. Variable voltage option is also available as well with the range between 0.35V and 8V.
There are three output modes available for the X Cube 2: Temp mode, Watt mode and memory mode. With its ability to fire up to 160W of power, it will enhance your vaping experience. The lowest wattage that can go is 6W. Variable voltage option is also available as well with the range between 0.35V and 8V. With the wattage setting, the lowest atomizer resistance that it can handle is 0.1ohm. On the other hand, when it is on temperature control mod, the X Cube 2 can handle resistance as low as 0.06ohm.
The OLED screen is beautiful with its ability to illuminate up to 16 million colors; this device sure will get everyone’s attention.
Smoke X Cube II is powered by 2 18650 batteries. To make it easier when it comes to replace the batteries, it can be easily slide off and the door is held secured with magnets.
For safety and reliable performance, protections come with the device including 12 seconds shut-off, short circuit/low resistance protection, overheat protection and low battery warning.
Smok X Cube II 160W Box Mod by Smoktech Features:
- Dimension: 100*60*24.5 (mm)
- Output wattage: 6W – 160W
- Output voltage: 0.35V – 8V
- Atomizer resistance (temp mode): 0.06ohm – 3.0ohm
- Atomizer resistance (watt mode): 0.1ohm – 3.0ohm
- Temperature control range: 100℃ - 315℃ and 200˚F - 600˚F
- Made out of Zinc alloy and stainless steel
- OLED screen
- Magnet sliding battery door
- Memory mode setting
- Bluetooth 4.0 technology (track device and upgrade)
- Spring loaded 510 connector
- Uses 2 18650 batteries (not included, can be purchased separatedly)
- 12 seconds shut-off
- Short circuit/low resistance protection
- Overheat protection
- Low battery warning
In order to use temperature control feature, it requires use of nickel coils and must be built with non-resistant wire.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.