Manhattan Mech Mod • 1:1 Clone
The Copper Manhattan Mod Clone is everything you could ask for when it comes to performance and functionality. The approximately 8.25 inch tall body is 100% copper. (BLACK & STAINLESS MODELS HAVE A STAINLESS STEEL TUBE) The body tube features 3mm thick copper sidewall. This incredible solid design boosts conductivity immensely not to mention adding its durability and beauty. This mod is compatible with 18650 IMR style batteries (not included) and should only be used with such. Most likely you will also want a high amp output of 30 amps or more. This competition mod has an innovative bottom switch that houses two rare earth magnets specially design to nest within the switch. This means you will not need to ever replace a spring and ensures a lifetime of proper firing. The strength of these rare earth magnets makes for a smooth button action and they posses enough force to ensure you do not accidentally fire when the mod is set down even with a large tank affixed. This Copper Manhattan employs highly conductive pure copper contacts to maximize performance. The contact is floating and will automatically adjust to most any 510 connection. The delrin isolator around the floating pin can be screwed up or down to fine tune the position to ensure a flush mount to the top cap. This mod has super low voltage drop due to its conductivity.
Copper Manhattan Mod Features
- 100% Pure Copper Body
(BLACK & STAINLESS MODELS HAVE A STAINLESS STEEL TUBE)
- 100% Pure Copper Firing Pin and Firing Button
- 100% Pure Copper Floating Pin
- Magnetic Switch
- 510 Compatibility
- AV logo engraved
- AV Manhattan style box
USING THE WRONG BATTERY OR IMPROPERLY USING THE RIGHT BATTERY CAN LEAD TO HARM TO YOUR BODY AND TO YOUR PROPERTY. AS A MECHANICAL MOD THERE IS NO PROTECTION CIRCUITRY IN THIS DEVICE, MAKE SURE YOU ARE USING THE CORRECT BATTERIES FOR THIS DEVICE AND THAT YOU ARE USING THE PROPER CHARGER FOR THOSE BATTERIES. WE RECOMMEND USING HIGH DRAIN IMR BATTERIES WITH SAFE CHEMISTRY.