Freemax Starre Pro TCT Tank • 4ml • 0.25 ohm Ni200 installed, 0.15 ohm Ni200 spare
The Freemax Starre was great, and it just got better with the Pro! Now featuring a top fill design for easy refilling, the Starre Pro Sub Ohm Tank by Freemax will make tank filling an easy process. Located at the drip tip is the adjustable airflow to provide a little more air to those vapers who like a loose draw. The primary airflow for this device comes from the bottom base. This airflow consists of two large cyclops style airflow slots that have even better airflow that the original Starre Tank. A dual vertical Ni200 coil is what gives you your superb flavor with this unit. Comes with a 0.25 Ni200 coil installed, with a 0.15Ω Ni200 head spare, these coils are rated to handle from 20-50W and 20-100W respectively! Wicked with organic Japanese cotton, the flavor off of the Starre Pro is fantastic.
WITH INCLUDED COILS ONLY USE THESE TANKS WITH TEMPERATURE CONTROL CAPABLE MODS such as Vapor Shark rDNA, Vapor Flask 2.1, eVic VT, Sigelei 75W TC, or eleaf iStick 40W TC, etc.You can use this tank on a standard mode subohm battery with Kanthal 0.25 or 0.5 Coils
Starre Pro Instruction Video: http://youtu.be/CMTT4YQwwcs
Starre Pro Tank Basic information
Ni200 Sub ohm Resistance:
Normal Sub ohm Resistance:
About the E-Liquid Refilling
Unscrew the rotating cover,and refill the e-liquid by needle e-liquid by needle tipped e-liquid bottle.
Starre Pro is top filling design for e-liquid, please do NOT refill at the bottom.
Please turn off the switch to prevent e-liquid leakage when you screw on the rotating cover.
About Replacing the Coil
1.Unscrew the bottom airflow control base;
2.Unscrew and remove the old coil head.
3.Drip few drops of e-liquid into the new coil head to wet the cotton wick.
4.screw the base into the tank and refill with e-liquid.
4.Keep the tank upright for 2 to 5 minutes after refilling to help prime the e liquid;
About how to use Ni200 Coil
Keep the tank upright for 2 to 5 minutes after refilling.When ready to use, fire the battery starting at a low power/temperature and gradually increasing the power/temperature to your preferred level.
1. Starre Pro is top filling design for e-liquid, do NOT refill at the bottom.
2. The working temperature of Starre Pro is between 200℉-600℉ (0.15 ohm @ 20W-100W; 0.25ohm @ 20W-80W),
transition gradually from low power to high power.
3. Tighten the coil into the base when refilling the tank.
4.Please turn off the switch to prevent e-liquid leakage when you screw on the rotating cover .
5. Keep the tank upright for 2 to 5 minutes after refilling to help prime the e liquid.
6.Do not fire the battery before filling the atomizer. If the tank is not properly filled and primed you could end up with:
A:burned organic cotton (Once organic cotton is burned,it can not recover and you will end up with continued burned taste)
7. Ensure your device supports Sub-Ohm coil at 0.15 Ohm to use the Starre Pro.
8. Use caution with the glass portion of the tank - it is glass and may break.